Sometimes, painting trim feels like a tiresome chore. The most frustrating part is handling the sloppy, irregular marks left behind on the walls by paint spills. One potential way to avoid these accidents is by using tape as a protective shield, although this technique requires meticulously placing tape along every edge of the trim.
Luckily there’s an easier way shown and proven by the best painting company in Malaysia! In today’s blog post we’ll show you how to avoid painting imperfections and get great-looking results with the best tricks!
The Pros and Cons of Using Painter’s Tape
Everyone needs help to make their painting job a success. Whether it’s through a friend or a painting tool that can make your work easier, there’s always a way to improve and perfect the job.
Painting tape is one of those tools that can help you paint beautifully without wasting time with taping or touching up mistakes. You use this type of tape by applying it to the trim before painting.
The best part about using painter’s tape is that you can get an instant line between your wall and your new color, but with little hassle or clean-up needed after. This makes for a quick fix without any fuss!
But just like any other painting tool, there are pros and cons when using this tape. Check out the info below:
Pros:
- It gives sharp lines around objects like trim for an attractive look
- Helps prevent paint from seeping under the edge of the tape
- Easy to find and very affordable
Cons:
- You have to wait until the paint dries before you can remove it or else your lines might smear or come off altogether. This makes for a longer drying time, which means more work and less fun!
- It can sometimes leave a film on the paint job if it’s not carefully removed.
While we recommend this product for small projects, it might be best to use other options like the cutting in method.
Painting With Cutting In Method
If you need to paint a trim but don’t want to use painter’s tape, you can simply use the cutting-in method. This method is quite popular with many professional painters because it gives great results without any fuss.
The cutting in method is done by free-handing the first line of paint. This means you don’t use any painter’s tape or a stencil to mark off where your trim will be painted. You simply hold your brush at an angle and start painting!
The great thing about the cutting-in method is that it doesn’t involve using tools, which makes for a convenient process without much hassle. Also, this technique can give crisp lines because no other objects are getting in the way from the edge of the wall to make sure everything matches up perfectly when finished!
However, if you do not have good hand coordination skills, this may be harder than it looks since there isn’t anything holding back drips from ruining your work.
The Advantages of Cutting In Method
Although the cutting-in method may seem a bit tricky for many, it actually has a lot of benefits that make it worth the effort. Here are some reasons why you might want to use this technique instead:
- You have more control over your work because there’s no tape.
- It can give clean lines without any mess since they don’t rely on other objects like painter’s tape does
- It allows for faster painting speed compared to using tools like tapes and stencils, which means less time waiting around!
- You’ll save money by not needing to buy anything extra either (like Painter’s Tape)
- It goes well with most types of paints and finishes even if the trim is made out of wood, metal, drywall, etc.
Tips For Painting With Cutting In Method
To ensure you get the most out of your painting project, take a look at these simple tips:
- Use a small brush or roller that can easily fit into tight spaces and corners. The smaller the width of your paintbrush/roller is, the more control you’ll have with the cutting in method. Make sure it has stiff bristles though because this type of material will make cleaning easier later on.
- Start from one side to keep things even, but if you notice any variations as soon as the first coat dries up, use another layer until everything matches nicely together. This should help cover up those mistakes without having to do much work yourself.
- Keep going back and forth between painting areas so that lines don’t start creeping forwards too quickly. If there’s only one area to be painted, for example, the corner trim section, go back and forth slowly to make sure you’ve properly dispersed paint on both sides.
- If your brush or roller starts dripping excess paint over where you don’t want it to be (like the wall), use a paper towel to wipe off any excess immediately so that it doesn’t give an uneven look.
In a Nutshell
In this blog post, we’ve discussed a few different ways of painting trim without using tape and avoiding uneven lines. With the methods outlined above, you should be able to paint your trim with ease and precision.
If you ever need help with your painting projects, reach out today so we can assist you!
About Author
